Making Custom Made Usb Drives
Ever since USBs have become pretty much a necessity for everyone who owns a computer these days, many people have been wanting to spruce up their thumb drives. Now there are actually stores or people who would create custom made usb drives for these type of people. Now with a few materials at home and some effort, it is actually possible to save a lot of money and create custom thumb drives right at home.
Now to do thins, one has to first get out his thumb drive and take out the existing case that it has. Now he cannot make a custom made thumb drive if the case is still there. So before doing anything, crack open the existing case and take out the raw thumb drive.
One very important thing to take note in this step is that sometimes one would be needing a screwdriver. Although there are no screws found here, the outer covering may be hard to take off with just bare hands. So with a screwdriver, he will have an easier time snapping off the existing cover without damaging the inside of the usb.
After that, then the next thing he has to do would be to get a little creative and look for an outer covering. Now this part is undoubtedly the most fun part because it is where one will choose what he would want as a new cover. Now one can actually use anything regardless of the material.
Some popular things that are used as outer coverings would be old toys, clay, or even legos. However, one does not need to limit himself to these things as he can get as creative as he wants. Once he has already chosen an outer covering for his usb, then he may go on to the next step and get himself a drill.
In this step, one would have to get a drill because he will need to open up a hole if for example, his toy does not have a hole on top. Now he will be needing a lot of measurements like the width as well as the length. Once he has already drilled the hole, then all he has to do would be to put the usb in.
The final step in this process would be to now just glue the thumb drive to the hole. Now one can do this by just putting the glue at the entrance of the hole and just wait for it to dry. One can do this by placing it in front of an electric fan or a hair dryer.
So as one can see, it is actually so easy to create a custom thumb drive. One can actually save a lot of money by doing this at home. No longer does he need to find a store that can do this for him. As long as he has a few materials at home and is willing to spare a little bit of time and effort to do this, then he can easily create a beautifully crafted custom thumb drive.
Now to do thins, one has to first get out his thumb drive and take out the existing case that it has. Now he cannot make a custom made thumb drive if the case is still there. So before doing anything, crack open the existing case and take out the raw thumb drive.
One very important thing to take note in this step is that sometimes one would be needing a screwdriver. Although there are no screws found here, the outer covering may be hard to take off with just bare hands. So with a screwdriver, he will have an easier time snapping off the existing cover without damaging the inside of the usb.
After that, then the next thing he has to do would be to get a little creative and look for an outer covering. Now this part is undoubtedly the most fun part because it is where one will choose what he would want as a new cover. Now one can actually use anything regardless of the material.
Some popular things that are used as outer coverings would be old toys, clay, or even legos. However, one does not need to limit himself to these things as he can get as creative as he wants. Once he has already chosen an outer covering for his usb, then he may go on to the next step and get himself a drill.
In this step, one would have to get a drill because he will need to open up a hole if for example, his toy does not have a hole on top. Now he will be needing a lot of measurements like the width as well as the length. Once he has already drilled the hole, then all he has to do would be to put the usb in.
The final step in this process would be to now just glue the thumb drive to the hole. Now one can do this by just putting the glue at the entrance of the hole and just wait for it to dry. One can do this by placing it in front of an electric fan or a hair dryer.
So as one can see, it is actually so easy to create a custom thumb drive. One can actually save a lot of money by doing this at home. No longer does he need to find a store that can do this for him. As long as he has a few materials at home and is willing to spare a little bit of time and effort to do this, then he can easily create a beautifully crafted custom thumb drive.
About the Author:
You can visit bestcustomflashdrives.com for more helpful information about Making Custom Made Usb Drives.
Categories:
0 comments:
Enregistrer un commentaire