Understanding What Electronic Boards In LCD TVs, The T-Con D50ud1 For Instance, Really Do
Once upon a time televisions were mostly made up of tubes encased in wood, wires, knobs, scanners, and rabbit ears. As with most things, televisions have become much more complicated and technical in today's world. Even though you may not have any plans to become a television repair person, you might still be interested in learning about the boards, such as the T-Con d50ud1, inside LCD tvs, if the science of electronics intrigues you.
If you open up the back of your television set you will probably find the power supply board, or power supply module, on the right hand side of your unit as you are looking at it. It will be the largest and heaviest of all the boards on the back of the set. The purpose of this board is to convert the AC, or alternating current, supply, which can change directions, into DC, or direct current, voltage.
Direct current moves in one direction only and is what the circuit inside the LCD television uses. In some televisions the power supply board and the inverter board are joined together. If the power supply board malfunctions you'll get no power or intermittent power.
The timing control board, or T-con, is the smallest board in the television. It is pretty much only found in LCD tvs. You'll probably find it under a shield toward the top of the back of the television.
The T-Con board is there to control the TFT, thin film transistor, driver and the circuit. If you're experiencing horizontal or vertical lines you may be having trouble with the timing control board. Other indications are a white screen, a double image, or no image at all.
You'll find the inverter board on one edge of the back panel. You won't find it at all unless you have an LCD tv. The purpose of the inverter board is to convert the low voltage DC that is supplied by the switched mode power supply. It turns the low voltage into high AC. This is what causes the backlights to light up. The inverter board and the power board are sometimes found together. You may have a problem with an inverter board when you see a dim screen, or when the display completely shuts down.
The main board is also known as the logic board, the digital board, the main module, and the mother board. You will recognize the main board because it is the one with the video and sound outputs and inputs attached to it. The main board takes in signals and converts the analog signals into digital. The main board may be malfunctioning when you don't have sound or color or a picture.
The jackpack or audio receiving board is sometimes separated from the main board. Its function is to take the sound signal to the processor and on to the amplifier which is what drives the speakers on either side of the television. If you don't have sound, or a high pitched one, or channels that change randomly, you need to have the jackpack checked out.
If you open up the back of your television set you will probably find the power supply board, or power supply module, on the right hand side of your unit as you are looking at it. It will be the largest and heaviest of all the boards on the back of the set. The purpose of this board is to convert the AC, or alternating current, supply, which can change directions, into DC, or direct current, voltage.
Direct current moves in one direction only and is what the circuit inside the LCD television uses. In some televisions the power supply board and the inverter board are joined together. If the power supply board malfunctions you'll get no power or intermittent power.
The timing control board, or T-con, is the smallest board in the television. It is pretty much only found in LCD tvs. You'll probably find it under a shield toward the top of the back of the television.
The T-Con board is there to control the TFT, thin film transistor, driver and the circuit. If you're experiencing horizontal or vertical lines you may be having trouble with the timing control board. Other indications are a white screen, a double image, or no image at all.
You'll find the inverter board on one edge of the back panel. You won't find it at all unless you have an LCD tv. The purpose of the inverter board is to convert the low voltage DC that is supplied by the switched mode power supply. It turns the low voltage into high AC. This is what causes the backlights to light up. The inverter board and the power board are sometimes found together. You may have a problem with an inverter board when you see a dim screen, or when the display completely shuts down.
The main board is also known as the logic board, the digital board, the main module, and the mother board. You will recognize the main board because it is the one with the video and sound outputs and inputs attached to it. The main board takes in signals and converts the analog signals into digital. The main board may be malfunctioning when you don't have sound or color or a picture.
The jackpack or audio receiving board is sometimes separated from the main board. Its function is to take the sound signal to the processor and on to the amplifier which is what drives the speakers on either side of the television. If you don't have sound, or a high pitched one, or channels that change randomly, you need to have the jackpack checked out.
About the Author:
See the featured products including the d50ud1 by referring to the Web. Spend a minute or two browsing the online store at http://www.tekbyus.com/product-tag/d50u-d1.
Categories:
0 comments:
Enregistrer un commentaire