A Look At The Impact The Monopulse Comparator Has Had On Radar Technology
If you are interested in military or aviation technology, you see one piece of equipment mentioned time and time again. Radar (short for Radio Detection And Ranging) is a way of locating objects and telling important information such as the direction in which those objects are traveling, how far away they are from a given point and how fast the object is traveling. The monopulse comparator is an important component of modern radar systems and has done much to make these systems more reliable and accurate.
Radar systems were first developed and used by the military. Various countries found it very helpful to be able to detect approaching objects, find out how fast they were moving and what direction they were moving in. It allowed them to detect potential incoming attacks while paying less attention to non-hostile objects or aircraft. Now these systems are used by many different groups and organizations.
Meteorologists have also started using these systems to monitor the weather and create forecasts. They can be very helpful if a severe weather system is expected. Radar can be used to determine how large or severe a storm such as a hurricane or a tornado is. Other types of storms such as blizzards and thunderstorms can also be mapped using these systems.
While many people think that these systems can just be used on land, this is not true. Marine radar will bounce signals off of nearby objects. This shows a ship where it is (by detecting the shoreline or marine buoys) or whether there are other ships in the same area.
A radar system is made up of a transmitter, waveguide, duplexer, receiver and a display processor. The transmitter generates the radio frequency which will be used to detect objects. There is a waveguide that is used to connect the transmitter with an antenna that will send the radio frequency out into the environment. A duplexer is then used to switch the antenna from transmitting to receiving and the resulting signal is captured by the receiver and displayed on the display processor.
Jamming used to be a significant issue with early systems. While most people think of jamming as an enemy action, this is not always the case. Jamming simply refers to interference from radio waves of the same frequency as a particular radar system. It can obscure objects or give an inaccurate idea of how fast they are traveling or the direction in which they are moving.
With modern systems, a single beam is emitted that is then split into two sections. They are directed in the same general direction but because they are positioned in slightly different ways it is possible to compare the returning signals to make sure that the results are accurate. A comparator is the device used to combine the signals into the single cohesive image that the radar operator will interpret.
If you are interested in taking a closer look at these items you will quickly learn that there are different types. Looking online will give you the most comprehensive information on the different variants available although you may find you will need to check out specialized websites in order to view them.
Radar systems were first developed and used by the military. Various countries found it very helpful to be able to detect approaching objects, find out how fast they were moving and what direction they were moving in. It allowed them to detect potential incoming attacks while paying less attention to non-hostile objects or aircraft. Now these systems are used by many different groups and organizations.
Meteorologists have also started using these systems to monitor the weather and create forecasts. They can be very helpful if a severe weather system is expected. Radar can be used to determine how large or severe a storm such as a hurricane or a tornado is. Other types of storms such as blizzards and thunderstorms can also be mapped using these systems.
While many people think that these systems can just be used on land, this is not true. Marine radar will bounce signals off of nearby objects. This shows a ship where it is (by detecting the shoreline or marine buoys) or whether there are other ships in the same area.
A radar system is made up of a transmitter, waveguide, duplexer, receiver and a display processor. The transmitter generates the radio frequency which will be used to detect objects. There is a waveguide that is used to connect the transmitter with an antenna that will send the radio frequency out into the environment. A duplexer is then used to switch the antenna from transmitting to receiving and the resulting signal is captured by the receiver and displayed on the display processor.
Jamming used to be a significant issue with early systems. While most people think of jamming as an enemy action, this is not always the case. Jamming simply refers to interference from radio waves of the same frequency as a particular radar system. It can obscure objects or give an inaccurate idea of how fast they are traveling or the direction in which they are moving.
With modern systems, a single beam is emitted that is then split into two sections. They are directed in the same general direction but because they are positioned in slightly different ways it is possible to compare the returning signals to make sure that the results are accurate. A comparator is the device used to combine the signals into the single cohesive image that the radar operator will interpret.
If you are interested in taking a closer look at these items you will quickly learn that there are different types. Looking online will give you the most comprehensive information on the different variants available although you may find you will need to check out specialized websites in order to view them.
About the Author:
You can visit etiworld.com for more helpful information about How The Monopulse Comparator Has Improved Modern Radar Systems.
Categories:
0 comments:
Enregistrer un commentaire